light to realize luminescence. The product does not contain radioactive elements, and can be used indefinitely, especially for short wave visible light, sunlight and ultraviolet light (UV light) under 450 nanometers. Accept the ability.
Here is the properties of the luminous powder. 1st short excitation time, long duration of luminous and afterglow, high brightness. 2ndvery stable physical and chemical properties, strong environmental adaptability, ordinary service life. 3rd safe and reliable, energy saving, green environmental protection.4th The particles are small, and the fineness and granularity are evenly distributed.
In the actual life, people make use of the long time luminescence characteristics of night light powder to make a weak light source, and have special use in the military department. This material is applied to various kinds of switch signs on the aviation instrument, clocks, windows, machines, and the handle of the door, and can also be pressed into various symbols and parts together with a variety of transparent plastic materials. Supplies (such as power switches, sockets, fishing hooks, etc.). These light-emitting components are illuminated at night, at night or by accidental blackouts, and after lightning, and it still continues to glow, allowing people to discern the direction of the surrounding and bring convenience to work and life. The ultra-fine particles of luminous materials can be added to textiles to make the colors more colorful. Children wearing luminous textiles can reduce traffic accidents. We use it to make the wristband glow so as to contribute to night event.
&nbpersonalized bracelets uksp;
custom-wristbands-fast-deliveryevent-wristbands-atlanta tars use it as their decorations, making you cool and full of flavor! As for the production process of silicone wristband, it is estimated that not many people have fully understood it. Pinshang Silicone explains the whole production process of silicone wristband.
Design of artwork
The design of artwork is generally based on the size of the sample artwork provided by the customer. Graphic drawing software, such as CDR or AI software, is generally used to make the artwork. If the customer cannot provide the sample artwork, we can cooperate with the customer to complete the design and production of the artwork free of charge according to the customer"s requirements.
The mold opening is that the mold master creates an offset plate according to the designed artwork, then uses the offset plate to carve a copper worker, and finally carves a steel mold with the copper worker. Some hand ring craft moulds have a relatively high technical content and take a relatively long time to produce. Generally, the mold opening period is calculated by five days. With the mould, the production will be quick.
According to the color number on the international Pantone color card specified by the customer, our color mixing ratio is aligned and the color difference is minimal.
The materials required for each wristband are weighed by an electronic scale. Generally, the wristband weighs about 5.5 grams.
Upper die production
After the mould is finished, it is produced on the machine. After the mold is installed, the machine needs to be warmed up. A 9-mold machine produces about 15000 pieces per day.
After the wristband is produced, the product shall be inspected and checked, mainly to see if it meets the specifications. If it does not meet the specifications, it will be discarded.
Each wristband is produced with a residual edge. After the quality inspection department passes the inspection, the product is sent to the post-process department for trimming. (Average trimming quantity per person per day is about 3,000 pieces).
Finished product inspection
After the edge is repaired, the finished product is obtained. It is also necessary to send the finished products back to the quality inspection department to check the trimming quality. If there are any unqualified products, they will be scrapped.
After the repaired products pass the inspection, they shall be packaged according to the customer"s requirements. Packaging is divided into PP bag independent packaging and naked packaging. Both are 100 pieces in a pack. Usually 20 packs per carton (2,000 pieces) are standard export containers. Packing is generally required by customers.
Inspection before sealing
After the packaging is completed, the quality inspection department will check the quantity. if there is no problem, seal the case and send it to the warehouse for delivery.
silicone-wristbands-size-chart econd, Unconditional refund for any unsatisfaction on our product or service.
Third, order less than 100 can get 50 pcs wristbands free & 5 pcs keychains free; order over 100 can get 100 pcs wristbands free & 10 pcs keychains free.
Fourth, Much cleaner, Logo with longepersonalized bracelets ukr lasting. More Smooth.
Fifth, Free digital proof. The cheapest price with all included. The fastest delivery with lowest rush charge.
Sixth, you can also use coupon to save 10% money on your order.
Finally, Different sizes f or your option: any width between F 1/4 inch to 2 inch, or any other figured bands with your special size. Professional Service Team: instant feedback, timely digital proof of making, 7*24 hours service f or you!